close icon Close

H290

Harvester Head

Weight (Without Rotator & Link) icon
1,870 kg / 4,123 lb
Weight (Without Rotator & Link)
Hydraulic Requirements icon
28 MPa / 4,161 psi
Hydraulic Requirements
Cutting Capacity icon
750 mm / 29.5 in
Cutting Capacity
Delimbing Diameter Tip-to-Tip icon
510 mm / 20.1 in
Delimbing Diameter Tip-to-Tip
Where to buy

The Waratah H290 is a powerful, high-capacity new-generation harvester head. Built for superior performance in regeneration harvesting, it was specially designed for use with large wheel-and-track-based harvesters.


The H290 features the highly efficient SuperCut 100 saw unit and can fell and process trees up to 760 mm (29.5 in.) in diameter. The SuperCut saw unit minimizes bucking damage, and with its integrated automatic chain lubrication and tensioning system, improves cutting performance while reducing maintenance time. The optional color marking system improves accuracy and ensures low dye consumption.

Four moving delimbing knives and one fixed, adjustable top knife follow the contours of the stem. The geometry of these knives ensures excellent delimbing quality — from large diameters down to small top diameters.

New dual-speed feed motors, with an enormous feed force of up to 41.6 kN (9,352 lbf), handle large-volume harvesting with optimum feed force and speed.

Technical Data

Dimensions:
Width arms open
1970 mm
6.5 ft
Width arms closed
1187 mm
3.9 ft
Height without rotator and link
1970 mm
6.5 ft
Weight:
Without rotator and link
1870 kg
4,123 lb
Felling/Cutting:
Maximum diameter saw cut
750 mm
29.5 in
Saw bar
900 mm
35.4 in
Chain type
10 mm
.404 in
Chain speed (m/s, ft/s)
40 m/s
131 ft/s
Feeding:
2WD with hydraulically driven rubber feed rollers
Feed force gross
With 1259/944-cc motors
37.3/28.1 kN
8,385/6,317 lbf
With 1404/1050-cc motors
41.6/31.2 kN
9,352/7,014 lbf
Maximum feed speed
4.5–6.0 m/s
15–20 ft/s
Maximum feed roller opening
760 mm
30.0 in
Delimbing:
Delimbing knives
4 moving and 1 fixed
Delimbing diameter tip to tip
510 mm
20.1 in
Maximum opening upper knives
800 mm
31.5 in
Maximum opening lower knives
870 mm
34.2 in
Hydraulic Requirements:
Maximum operating pressure
28 MPa
4,161 psi
Recommended pump capacity
320–380 l/min
84–100 gpm
Control and Measuring System, Adaptation:
Timbermatic 10, 30, 300, H09
TimberRite, Motomit IT/PC, Dasa 4
Control and Measuring System, New Delivery:
TimberRite

Optional Configurations

Color marking system
Tireco and Mense rollers
Stump treatment
Rotator and link
Steel thumbnail rollers
Rotator valve

Not all models available in all countries. Service and support may also vary by region. Please contact a dealer for more information.