close icon Close

HTH623C

Harvester Head

Net Weight icon
3050 kg / 6,724 lb.
Net Weight
Hydraulic Requirements icon
35 MPa / 5,075 psi
Hydraulic Requirements
Max Delimb Opening icon
70 cm / 27.5 in.
Max Delimb Opening
Max Feed Roller Opening icon
90 cm / 35.4 in.
Max Feed Roller Opening
Max Sawing Capacity icon
75 cm / 29.5 in.
Max Sawing Capacity
Carrier Size icon
25-34 metric ton
Carrier Size
Where to buy

Power. Torque. Speed. With its large, high-torque feed motors, delimbing power, and great balance of feed speed, the HTH623C is born to perform with a 25-ton carrier.


Its hydraulic design provides high-flow characteristics combined with low-pressure drop — for increased performance in any application and the toughest conditions.

Thanks to the TimberRite measuring system, you’ll have a wealth of data and information, a large color monitor (optional), and wireless data transfer at your command — which means you can run your business smarter and more efficiently than ever before.

Technical Data

Dimensions:
Maximum feed-roller opening
90 cm
35 in
Width (maximum)
200 cm
79 in
Weight:
Excluding links and some options
3050 kg
6,724 lb
Butt Saw:
Saw type
Waratah 3/4
Maximum cutting diameter
75 cm
30 in
Bar
80 cm
31 in
Saw limiting
Available with SuperCut 100
TopSaw:
Saw type
0.404
Maximum cutting diameter
45 cm
18 in
Bar and chain type
64 cm
26 in
Feed System:
Three feed rollers with full hydraulic synchro-drive
Various feed-wheel options available
Motor option 1
837 cc/500 cc
Motor option 2
1048 cc/630 cc
Feed speed — maximum flow
5.4 m/sec @ 360 l/min
18 ft/sec @ 95 gpm
Delimbing:
Top knives
1 floating, 2 moving
Maximum delimb opening
70 cm
28 in
Bottom knives
1 fixed
Maximum delimb opening
85 cm
33 in
Control and Measuring System Options:
TimberRite

Optional Configurations

Felling/Cutting:
Saw type
SuperCut 100
Maximum cutting diameter
75 cm
29.5 in
Bar and chain type
90-cm Jetfit
32.5-in and 0.404-in pitch
Saw limiting
Standard
No topping saw
Optional
Color-Marking System:
Optional
Delimbing:
Bottom knives
1 moving

Carrier Requirements

Carrier Size Range:
25 to 34 tonne
Hydraulic Requirements:
Maximum pressure
35 MPa
5,075 psi
Useable pressure
32 MPa
4,641 psi
Maximum flow
320–360 l/min
80–85 US gal/min
Optimum flow @ pressure
360 l/min @ 15 MPa
95 gpm @ 2,207 psi

Not all models available in all countries. Service and support may also vary by region. Please contact a dealer for more information.