close icon Close


Harvester Head

Net Weight icon
3450 kg / 7,606 lb.
Net Weight
Hydraulic Requirements icon
35 MPa / 5,075 psi
Hydraulic Requirements
Max Delimb Opening icon
76 cm / 30 in.
Max Delimb Opening
Max Feed Roller Opening icon
85 cm / 33.5 in.
Max Feed Roller Opening
Max Sawing Capacity icon
81 cm / 32 in.
Max Sawing Capacity
Carrier Size icon
30+ metric ton
Carrier Size
Where to buy

Proven in medium to large wood harvesting and processing, Waratah’s big-timber-tackling HTH624C can easily handle species such as radiata pine, poplar, and aspen — up to 81 centimeters (32 inches) in diameter. With its rugged frame, large synchronized feed rollers, incredible drive power, and precision delimbing quality, it’s a highly productive processor — whether you’re working at a landing or felling and processing at the stump.

The 624C offers rear-mounted head module bringing increased protection and less shock load, increased top-saw cut capacity, superior hose routing, upsized main saw, strengthened hanging bracket, wider frame, and a number of feed-roller options. It is also ready for the TimberRite control and measuring system, which gives you the accuracy you need for precision processing, even in extreme conditions.

Technical Data

Maximum feed-roller opening
85 cm
33 in
Width (maximum)
200 cm
79 in
Excluding links and some options
3450 kg
7,606 lb.
Butt Saw:
Saw type
Waratah 3/4
Maximum cutting diameter
81 cm
32 in
91 cm
38 in
Saw limiting
Available with SuperCut 100
Top Saw:
Saw type
Maximum cutting diameter
50 cm
20 in
Bar and chain type
75 cm
30 in
Feed System:
Three feed rollers with full hydraulic synchro-drive
Various feed-wheel options available
Motor option 1
1048 cc/630 cc
Motor option 2
1395 cc/800 cc
Feed speed — maximum flow
3.7 m/sec @ 360 l/min
12.1 ft/sec @ 95 gpm
Top knives
1 floating, 2 moving
Maximum delimb opening
76 cm
30 in
Bottom knives
1 fixed
Control and Measuring System Options:

Optional Configurations

Saw type
SuperCut 100
Maximum cutting diameter
75 cm
29.5 in
Bar and chain type
35-in and 0.404-in pitch
Saw limiting
No topping saw
Color-Marking System:
Maximum delimb opening
Bottom knives

Carrier Requirements

Carrier Size Range:
30+ tonne
Hydraulic Requirements:
Maximum pressure
35 MPa
5,075 psi
Useable pressure
32 MPa
4,641 psi
Maximum flow
360 l/min
95 US gal/min
Optimum flow @ pressure
360 l/min @ 15 MPa
95 gpm @ 2,207 psi

Not all models available in all countries. Service and support may also vary by region. Please contact a dealer for more information.